Roswell Garage Door Repair: Tips to Extend the Life of Your Garage Door

If you are like most people, you probably use your garage door several times each and every day. You don’t pay much attention to it. You expect it to open and close when you press the button on the remote or use the wall button. And your garage door faithfully opens and closes several times each day without a hitch. It can do so for years. However, one day you notice that it starts having problems opening and closing. Don’t worry; this is normal and it is not your fault. Like most things in this world, your garage door will eventually break. After all, it is made up of so many parts and some of them are under a lot of stress every time you operate the door.

While you can’t prevent some parts of the door from breaking after some time, you can extend the life of your garage door if you follow some simple tips. Let’s take a look at the average life expectancy of a garage door, some of the most common problems that develop over time, and some tips that will prolong the life of your garage door.

The Life Expectancy of a Garage Door

In general, a garage door can last up to 30 years, which is a pretty long time. The door itself is usually coated, so it is highly resistant to rust. Wooden doors are also treated with various chemicals that prolong the life of the wood. Fiberglass doors can last a lifetime if you don’t abuse them.

However, the springs on your garage door usually last between 5,000 and 20,000 cycles. Torsion springs, for instance, usually last 15,000 to 20,000 cycles, while extension springs only around 5,000 to 10,000 cycles. Of course, this depends on the quality of the springs and on their manufacturer as well. Depending on how often you use your garage door, the springs can start having problems after just 3 or 4 years.

The opener is also relatively sensitive, as it has a lot of moving parts and is under a lot of stress every time you open and close the garage door. An opener should last anywhere from 10 to 15 years. However, lower quality openers can start having problems after just 4 or 5 years. Again, it depends on the manufacturer of the opener and the quality of its parts.

The Common Problems With Garage Doors

Some of the most common problems with garage doors are caused by sensors, tracks and transmitters. If the photo eye sensors are misaligned or are dirty, the door will refuse to close. These sensors are used to detect if anything is underneath the door and must be perfectly aligned with each other and able to transmit their invisible beam.

If the tracks are misaligned, you have a serious problem on your hands. Tracks that are out of alignment prevent the door from opening and closing as it should. Even if they may not prevent the door from operating, poorly aligned will place a lot more stress on other parts of the door, such as the springs and opener. In other words, misaligned tracks can cause damage to other, more expensive parts of your garage door over time.

The transmitter may start to send commands to the door on its own or may simply stop working for no apparent reason. If this happens you may have to reprogram the transmitter.

The springs on your door are responsible with opening and closing the heavy door. As such, they are under a lot of tension and are usually the first parts that will break. In case one of the springs snaps, you are advised to replace both springs as a pair.

The opener is also a very sensitive part of the door. It commands the door to open and close and is also under a lot of tension when the door is operating. This means that it will eventually start malfunctioning due to wear and tear.

How to Extend the Life of Your Garage Door?

There are a few simple things that you can start doing today that will extend the life expectancy of your garage door and its various components. Of course, nobody knows exactly how many cycles your springs and opener can operate until one of them breaks. There are no guarantees, but you can get the most out of your garage door by applying these tips from experienced garage door repair experts:

• Keep the door lubricated. The springs, hinges and rollers of the door must be lubricated periodically. It is a good idea to lubricate these parts every three months. A garage door expert can do it for you as part of a maintenance package.
• Keep the garage door clean. It is as simple as washing both sides of the door with a sponge and some warm water and soap. Also clean the photo eye sensors when you wash the door.
• Eliminate all debris from the garage door tracks.
• Periodically check the weather stripping to make sure it is not cracked.
• Keep the door balanced. A garage door that is out of balance will place undue stress on various parts. You should check the balance of the door twice every year.
• Periodically check the safety features of the door. Command the door to close and then place your hand in front of the photo eye sensor; the door should stop and reverse immediately. Also, try to prevent the door from closing by using both hands; the door should stop and reverse as soon as it senses resistance.
• Check the cables on the bottom roller bracket and make sure there are no broken strands.

An Expert Can Help You

A garage door repair expert from Roswell Garage Door Repair in Roswell, GA can help you keep your garage door in tip top shape and extend its life expectancy. Our professional can perform periodic maintenance services and check the door for any signs of problems. An expert knows exactly what to look for and how to maintain a garage door in perfect working order. Also, it is always best to fix or replace any problematic part before it gets a chance to damage other – more expensive – parts of your garage door.

Article source here: Roswell Garage Door Repair: Tips to Extend the Life of Your Garage Door

Garage Door Spring Issues You Can Identify

Garage door springs can be complicated to understand. There are some things that you might read on the Internet that are true and some that are not. However, our garage door repair technicians at Roswell Garage Door Repair are far too familiar with the problems that garage door springs can cause to people. We repair and replace them practically every day. Since your springs go through a lot of use, it is only reasonable to conclude that they will eventually end up needing some attention eventually. When they do, they usually begin to show signs of this in the way they perform or in most cases, in the way they don’t perform.

 

What Your Springs Do

 

Your garage door springs lift and lower your heavy garage door. If the garage door is a commercial door, they have even heavier weight to lift. This lets you know just how sturdy the springs actually are. Your garage door opener operates the door but it is your springs that do the heavy lifting. Without sturdy springs to lift the door, the garage door opener wouldn’t be of much use to you. There are two types of springs that we service, extension springs and torsion springs.

 

We mount the torsion springs horizontally about the top of your door but the extension springs are mounted on each side of your garage door. These hand parallel the horizontal tracks. They both have a life cycle and once the life cycle has been reached, it will be time to either replace the springs or repair them. They will begin to wear out until they are repaired or replaced.

 

The torsion springs typically have a lifespan of 10,000 cycles and are made of tempered and hardened steel. They don’t typically wear out sooner than the 10,000 cycles since they are built to last. However, keep in mind that they go through a lot during their life cycle. Some doors are used more often than others, therefore, the life cycle of one persons springs will differ from someone else’s. They hold a lot of stored energy and need to be repaired to prevent them from breaking and falling down on top of anything or anyone. A household with two vehicles who make daily trips, the average torsion spring should last for up to 7 years. It’s advisable to replace the springs at the same time because they usually wear out at the same time.

 

Extension springs are usually found in older buildings or homes. They will generally last just as long as torsion springs. However, there are various factors to consider when it comes to how long they will actually last, such as weight of the door, humidity, and the amount of maintenance begin performed on the door.

 

DIY Or Not DIY

 

Do-It-Yourself projects are good but some things are simply better left to the experts. When you’re talking about the installation, repairing or replacing of garage door springs, this is something that should only be handled by qualified and professionals. These types of springs are extremely dangerous due to the amount of pressure they are wound up with. If one were to break while you were working on it, it could cause you grave injury. In some worst case scenario’s, human life has been lost due to an improperly handled spring. We do not wish this for anyone and that is why we urge you to rely on the expert services of a qualified garage door repair technician to evaluate your garage door springs. Aside from harming yourself, if the spring were to break, it could fly through a window and harm someone else. If you do not want to be the cause of injury to anyone, including yourself, leave the job in the hands of the experts. Handling it on your own simply is not worth the effort.

 

Determining If Your Springs Are Damaged

 

Here are some ways to determine if there is a problem with your garage door springs:

 

• Your door falls down quickly with a loud sound
• Your door rises up about 6 to 8 inches but then suddenly stops.
• It begins to start slowly and then eventually begins to speed up and starts going up quickly
• You notice a loud bang when lifting the garage door

This can occur when they aren’t even being used and this is why some people dismiss the sound, assuming it was nothing until the next day when they realize they are not able to open their garage door

• It goes up and down at a slight angle

A broken extension spring will cause the other spring to work harder to compensate, which is why it looks crooked

• The door jerks as it goes up

This is an indicator that a spring is broken and the other one is carrying the  weight of the broken spring

• While lower your garage door, it suddenly falls down very quickly

In this case the garage door opener is bearing the weight of the unbalanced springs

• If you see a gap in your torsion springs it means a spring has broken and the metal has recoiled, leaving a gap
• The top part of your garage door is bent

This can be caused by the garage door opener trying to lift the weight of the door without the help of the springs

• It is hard for you to lift the garage door when it is manual mode

 

If you notice any of these things occurring, discontinue use of your garage until you have sought professional help. You would be wise to pay close attention to how your garage door is functioning whenever you use it. Not paying attention could be dangerous to you and whoever uses your garage. We know this is not something that most people do until it is too late that is why we always suggest regular, routine garage door maintenance. With garage door maintenance, a weak and worn spring can be determined before in incident occurs.

 

Your best bet

You are not really betting but you are encouraged to call a licensed, bonded and insured garage door repair shop that specializes in spring service. You can call our Roswell Garage Door Repair shop or another local firm that you like and trust. Most offer free price quotes, same day service and round the clock emergency help in case you need it. Working with the right garage door repair shop can be an affordable and time saving experience. Think about it; your time is valuable and so is your safety. Why not enjoy warranty protection, numerous safety and performance checks and superior quality springs and service by calling the professionals that handle garage door springs on a daily basis?

Article source here: Garage Door Spring Issues You Can Identify

Roswell Garage Door Repair in Roswell, GA - Live Stream Edit

Watch on YouTube here: Roswell Garage Door Repair in Roswell, GA - Live Stream Edit
Via https://www.youtube.com/channel/UCNKUQ_YIJIlYibM07QiBZyA/videos

Roswell Garage Door Repair in Roswell, GA - Live Stream

Watch on YouTube here: Roswell Garage Door Repair in Roswell, GA - Live Stream
Via https://www.youtube.com/channel/UCNKUQ_YIJIlYibM07QiBZyA/videos

DOES YOUR GARAGE DOOR HAVE A MIND OF ITS OWN? DON’T WORRY. THERE’S SOMETHING YOU CAN DO!

Is your garage door opening and closing at random? There are numerous reasons this is going on:

 

1. First, test the transmitter frequency. A neighbor’s remote may have accidentally been programmed to the exact same frequency as yours. If that’s the case, erase the remote control from the memory of your garage door opener, and then reprogram the keyless entry and remote control.
2. Second, inspect the transmitter. It might be wedged under something that inadvertently pressed your remote control mechanism, which means, somewhere, a button is stuck. The transmitter may be sitting under something you forgot you left in your automobile, or underneath something else you left close by. If the LED light by the learn button is flashing continuously, then your garage door opener is receiving a steady signal from your remote control. (You’ll find the learn button above the antenna wire hanging from the motor head, or under the light cover. It’s either red, orange, purple, green, or yellow.) Take out the batteries from your remote, and if the light stops flashing, then the problem is a stuck button.
3. If neither of these is the culprit, there may be a short in the wall-mounted door control, which means that unwanted signals are going out to the garage door opener or to the logic board (that is, the circuit board).

• If your garage door opener activates by itself while the wall-mounted door control panel wires are disconnected, you’ll probably have to replace the receiver logic board.
• If the opener doesn’t activate by itself while the wall-mounted door control panel is disconnected, then, in all likelihood, you’ll need to replace the wires to your wall-mounted door control panel.

 

4. Besides a short in the logic board, there could be a short in the wall button wiring, the wired keypad, the wall button, or the garage door opener remote; or, there are some other electronic issues to be dealt with.

 

5. Your remote might be emanating random signals. This is often a sign that the batteries are nearly worn out, or that the remote is faulty.

 

6. A police radio, CB radio, local radio station, or radio tower can make a garage door open and shut by itself.

 

 

DIY

 

There are some additional problems you can likely resolve all on your own. If your garage door ever goes on the blink, there are many possibilities for the difficulties you’re facing:

 

Does the garage door opener run for several seconds, but then turn off? Often this will happen on older garage doors. The garage door is shut, and the garage door motor tries to lift it, but it still doesn’t move. First, look at the springs. If the springs aren’t broken, then examine the track for any grime or minute obstacles. If neither of these is the issue, maybe your garage door is the kind that has a built-in lock that’s engaging by mistake.

 

Does the garage door not open with the remote? There are several reasons this is occurring. 1. You could be out of range from your garage door. 2. Perhaps you have to recharge or replace your batteries. 3. The garage door motor’s antenna is likely damaged, or it’s blocked from the signal. 4. Your remote must be reprogrammed.

Does the garage door opener run, but the garage door still will not open? If there is a power outage, your garage door opener has a disconnect switch, so that you can manually close or open the garage door. This switch is usually attached to a rope or knob, which can sometimes unintentionally get unhooked. Open or shut your garage door all the way, and then reattach the hook securely. Your transmitter should be back to normal.

 

 

More Complicated Problems, Calling for Professional Attention

 

Does the garage door slam with a loud bang? Then in all probability, you have a broken garage door spring, which isn’t offsetting the garage door’s weight properly. Or, the cables might be broken. In either case, this is bad. Call a garage door repair technician right away.

 

Does your garage door only go part way down, but open again? A garage door is designed with a reversing mechanism to stop it from smashing an object in its path. The reversing instruction is activated by any item that is blocking the garage door’s path ~ a bicycle, a trash can, or a box, for instance. Another possibility is that there’s a build-up of debris on the tracks ~ a tiny object or grime ~ which keeps the rollers from moving. The expertise of a garage door repair professional is required.

 

The garage door track may be out of alignment. This is also a big problem. When the metal track isn’t in alignment, the garage door isn’t going to be moving at all. Check for any gaps between the rail and the rollers, and also look closely to see if there are any bends in the rails. The garage door’s significant weight will worsen all these issues eventually, so don’t procrastinate! Your garage door is bound to grow more and more dangerous. It’s time to hire a garage door repair expert.

 

 

It’s never a good idea to try to adjust your garage door yourself ~ unless you’re an engineer! If your garage door isn’t serviced properly, the garage door springs can go straight through a wall! Furthermore, there’s the possibility of serious injury, and even death. The garage door bottom brackets, cables, and drums will likely also need adjustment. It’s not worth it to take any risks. So unless you already know exactly what you’re doing, then your best bet is to hire a local garage door repair technician. If you live anywhere in Roswell, Georgia, then consider hiring a reputable garage door repair company you can count on, such as a staff mobile garage door repair specialist at Roswell Garage Door Repair, where free consultations are available.

Article source here: DOES YOUR GARAGE DOOR HAVE A MIND OF ITS OWN? DON’T WORRY. THERE’S SOMETHING YOU CAN DO!

Roswell Garage Door Repair: What to do when a garage door won’t open or close with the remote control

Electronic garage door openers are a convenience that nobody wants to live without. Given the fact that the garage is the main point of access of most homes, you want to be able to enter and exit through it without any hassles.

While you can usually expect all your door’s components to work for several years with no problems whatsoever, they’re not immune to the occasional glitch.

If you’ve found that you’re no longer able to open or close your garage door with a remote control, there are a few things to check before calling an expert. After all, your issues could be as simple as needing a battery change, or you might be dealing with more serious damage.

With that in mind, here is what we advise homeowners to do in this situation.

Test the wall switch 

See if you can open the door by pressing the button by the opener. If yes, then the problem lies on the remote control itself. Otherwise, you’ll either need to replace the opener battery, or you might need to get a technician to repair the motor for you.

If you have more than one remote control

It’s always best to check them both. If one of them works, but the other fails, you just need to replace the battery. You’ll most likely have purchased both transmitters at the same time, so don’t rule out the possibility of both needing a battery change. Open up the back of the remote (depending on your type of opener, you might need a screw driver to do this) and put a brand-name battery inside – avoid the cheaper generics as they will not last. If that doesn’t fix your issues, then proceed to the next step.

Inspect the door for damage

There are various maintenance checks you can do yourself before calling a garage door repairs technician. Here are the key things to look out for:

• Is your door quite visibly out of balance? In some cases, you might be able to tap it back into position. But, most often, you’ll need an experienced repairs technician to do the job. If in doubt, leave it to the professionals – you don’t want any unnecessary damage on your hands.
• Check the roller bracket for any broken pieces, signs of rust, damaged springs or rollers. This is very much a “look, don’t touch” procedure: broken springs and rollers are very dangerous to handle without proper training and tools, as they will leave your garage door quite vulnerable to collapsing.
• Inspect the area around the photo eye for any built up dirt – if you can see debris and gunk amassing in the area, clean it up with a streak-free cleaning solution and some warm water. You’ll find the right cleaner for the job at your local garage door repairs business.
• Another check for photo eyes: make sure they’re not misaligned. In some cases, you can realign them yourself using a spirt level (just remember to measure the angle from the ground on each side). If they’re too misaligned, however, you’ll need to ask a technician to do it.
• Try to lift up the door manually. It shouldn’t be heavy to lift up – if you struggle to open it or it won’t stay in place, your door might be out of track. In this instance you’ll need to contact a garage door repairs professional immediately.

Call an expert

When all things fail, your best option is to call a garage door repairs technician to inspect your opening and closing issues.

All credible professionals will have experience, training, and a full inventory of tools by their side. You can expect quality repairs and replacements, for very affordable prices and with a good sense of immediacy in the most urgent cases. In fact, most locally-based operators will provide 24/7 emergency assistance for their customers, and won’t charge for initial consults or price quotes.

Take the time to do some research before settling on a garage door repair service. See if anyone you know (friends, family, neighbors, acquaintances) can recommend any businesses in your area, and note down specific companies for your inquiries. Always hire a local operator, with a fully verifiable address. Where possible, try to consult with them in person – though talking on the phone is perfectly reasonable too. Ask the business about product warranties, client references (good professionals won’t balk at this), minimum callout charges and a full cost breakdown for whatever repairs you might have in mind. Online reviews can help you glean a business’s reputation too, and casually asking how long the company has been operating might give you an indication of whether they’ll be able to uphold their warranties. A quick search for a company through the Better Business Bureau will show you if any complaints have been laid out against them, and checking their credentials against the manufacturers they work with could help out too.

What about homeowners in Roswell, GA? You can always count on the Roswell Garage Door Repair crew to set your problems straight. Talk to our licensed, insured and field-tested technicians to find out more about our solutions. Tell us your concerns, and we’ll try our best to point you in the right direction – if needed, we can come to inspect the damage at your convenience.

No matter where you’re based, though, finding the right professional for the job is as simple as making the right inquiries. Clarify everything with the person you’re consulting, and don’t rush the hiring process.

We hope this guide helps you make sense of a malfunctioning opener, and the precautions to take if any issues occur. Whether you’re dealing with a remote control that needs to be replaced, a faulty battery that needs changing, or a more complex repair that needs to be addressed, these quick checks will guide you towards the right solutions. Always get in touch with a qualified professional in your area if any issues arise, or if you have any pressing queries and concerns. From there, everything will be back to operating smoothly shortly.

Article source here: Roswell Garage Door Repair: What to do when a garage door won’t open or close with the remote control

Top Reasons Why Your Garage Door Will Not Open

There may come a time when you are unable to open your garage door. Don’t panic. These things happen from time to time. You’re not the first person that has happened to. When someone in Roswell, GA has a problem with their garage door, they often rely on Roswell Garage Door Repair. We know how to effectively evaluate the situation and fix the problem for you. However, you may be wondering whether or not it is something that you are doing or have done to cause the problem. Here are some of the most common reasons for your garage door to cause this type of problem.

 

Even when you are prone to try to research how you can fix the problem on your own, but this is definitely a situation that should be handled by a professional garage door technician. Knowing the exact cause of the problem makes it possible for you to take immediate action. It could be something that is uncomplicated and something that you could fix on your own. We’re not against your fixing the problem on your own if it is an easy fix but we are against your troubleshooting the problem. This could result in your being harmed. You can avoid this by calling on our qualified service technicians to handle the job.

 

Here are the top reasons why your garage door might not open:

 

• Transmitter Problem

We’ll make sure that your garage door transmitter is working properly. If the transmitter on the wall is still able to open the garage door, the problem may be something as simple as replacing the battery to your car transmitter so that the transmitters communicates effectively with each other. When you do this, you might as well change the battery to the transmitter on the wall since they were likely installed at the same time. This is definitely something you that is safe to do yourself. Just keep in mind that some transmitters have a back that needs to be screwed off with a screwdriver.

 

• Obstructed Photo Eyes

To serve as a way to protect you from harm, there are photo eyes on both sides of the garage door. When there is debris in the path of either of the eyes, you’ll have a problem with your doors opening. The photo eyes are designed to keep the automatic door from shutting on you or your car. If the door opens but when you try to close it, you’ll need to inspect the photo eyes for debris or something that could be blocking them. It is possible for the beams to get blocked and prevent the doors from working normally. The photo eyes can also become misaligned over time, which means the eyes may not align. When they do not align, this will prevent the door from opening. This is also something that you can do yourself. You have to be careful when cleaning them or you could actually scratch the lens. All that is required is a soft cloth and streak-free cleaner to clean away any debris on the photo lens. Checking the alignment can be a little tricky. You might want to call on the services of a trained professional to fix it if you believe this is the cause of your trouble.

 

• Tracks Unaligned

In order for the door to operate properly, the metal track that it runs on has to be properly aligned. When there are visible bends or gaps between rails and rollers, there is certain to be trouble. Since the door itself is very heavy, it can contribute to the problem, making it so bad that the door will not work when you need it to. This also makes it very dangerous to operate your garage door. You can determine that the door is misaligned by listening to your car when you are pulling in and out of the garage. If you notice any rubbing noise whenever the door gets to a certain point on the track when it opens and shuts, you may have a misaligned track. It might even begin to slow down whenever it gets to that point. There are a few simple tricks to fix the problem. You might be able to gently tap on the track with a rubber mallet to get it back into the right position. A level is needed to ensure it is straight.

 

• Out of Range Transmitter

When you’re transmitter will not enable you to open your garage door, the problem could be that it is out of range of the range of the garage door. There is a very specific range that the transmitter must be in of the door in order for it to operate. If you are attempting to open the door to your garage without being physically in front of your home, it will cause problems with your door opening. Wait until you are in front of your driveway to press the transmitter button. If the transmitter is the problem, this should remedy the problem. If this doesn’t remedy the problem, the next thing to check is that the antenna inside your garage is not obstructed by something. If it is blocked it will not be able to send the signal that it should in order to signal the door to open or close. Also, make sure that your antenna isn’t damaged. If the antenna is damaged, you’ll need the help of one of our qualified service technicians to replace it.

 

These are just some of the top reasons why your garage door might not open. These are also the things that are easiest for you to resolve on your own. However, if none of these things work, chances are that you’ll need to rely on the services that we have to offer to you. You’re most likely going to find it a lot easier to leave the job to the trained professionals who know exactly where and what to look for.

Article source here: Top Reasons Why Your Garage Door Will Not Open

GARAGE DOOR WON’T STAY OPEN

Are you experiencing a garage door phenomenon that involves it not staying open? Does it start to rise and then suddenly stop and then come back down? Garage door activity like this can be quite worrisome; after all, what if it comes back down on top of your car, or you? Roswell Garage Door Repair offers these easy tips on how to deal with this problem. Read on and if you have any questions, give our shop a call or contact your favorite Roswell, GA garage door repair location.

Who or what is the culprit?

Our garage door repair pros often get calls about their garage doors that won’t stay open. One of their first questions is “what causes this?” They want to know if the problem is their remote, or their springs, or maybe their opener system. The answer depends on each person’s garage door and circumstances so we’ll start with talking about the springs.

Power lifters

Your garage door seems to magically lift and lower when you push the remote button. In fact, some people assume that the opener IS the remote and that this is what does all the work. In reality, it is your set of garage door springs that really does the heavy work. You either have torsion or extension springs operating your home or business garage door. Both work well and can last for thousands of cycles. Sometimes, however, they snap or become damaged and when they do, it is reflected in your garage door’s performance.

Warning!

Now, please don’t go out and buy new springs and try and fix or replace them yourself! Spring repair is best left to the experts that have the skillset, knowledge and experience in servicing them. Garage door springs can be dangerous, too. This is especially true for extension springs that have caused bodily injury, property damage and even death when not serviced correctly so don’t take chances; call for a professional, if needed!

You CAN do this to test your springs

While it is best to NOT repair or install your own torsion or extension springs, there is a simple test that you can do on your own that is safe and easy to do. You can manually disconnect your garage door from the opener. It is still attached to your springs but the opener will be disconnected. Simply pull down on the red knob at the end of the emergency cord. This allows you to lift your garage door by hand. When you do this, notice how easily or how difficult it is to lift your garage door. Did it go up smoothly or did you notice some resistance and choppy action? Now open your garage door all the way and see what happens. Did it stay or start to come back down on its own? If you experienced a hard to lift garage door, or if it started to come back down on its own, you need spring repair or at least to have your springs re-tensioned. This is most likely the reason that your Roswell, GA garage door won’t stay open when you need it to.

Another possible culprit

If your garage door starts to rise but then “changes its mind” and comes back down, you may be experiencing a problem with your close limit switch. It most likely does not need replacement; only adjustment. It works like this. As your garage door rises, the opener motor pushes against the limit switch which stops the rise once the garage door has reached the correct height. If the limit switch is not set right, the garage door will not go all the way up and may start going back down again. You can adjust your own limit switch on the opener motor. Feel free to refer to your owner’s manual for help or go online and see any number of YouTube videos that give you over the shoulder instruction on how to make this adjustment. If you wish, you can always call a local Roswell, GA garage door repair technician that can make the adjustment easily, and on your time frame.

Are you renting or do you own?

If you are renting your home, you should contact the property manager or owner and let them know about the problem. Usually, they will get it fixed for you at no charge, but some leases have a clause that states that repairs over a certain dollar amount are their responsibility and under that amount; yours. Check your lease agreement for your particular situation. If you own your property or are lease optioning it, the repairs are all up to you. Be sure to save any receipts for expenses incurred while getting your garage door fixed or adjusted. If you are using a local Roswell, GA contractor, handyman or garage door repair expert, try and get two or more estimates and/or opinions as to what the problem is. Get your service estimates in writing and if you like the service you get; add the technician’s telephone number to your smart phone for handy access at a later date.

Should you call a professional?

That is your choice but always consider the options. You might want to try DIY (do-it-yourself) service in order to save a little money or to learn a new skill. Or, you may have no interest whatsoever in servicing your own garage door and just want the job done right and done now! In that case, a call to a full service Roswell garage door repair shop is what is needed. You are always welcome to call on Roswell Garage Door Repair or your favorite local establishment if you already have one in mind. Remember; your garage door needs to work correctly, safely and reliably. Why not use a service that can help with every component of your home or business garage door? From opener unit and springs to safety sensors and garage door locks, choose a professional shop that does it all.

Article source here: GARAGE DOOR WON’T STAY OPEN

HOW TO PROTECT YOUR GARAGE FROM EXTREME TEMPERATURES TO PROVIDE COMFORT AND SAFETY IN COLD OR HOT WEATHER

Does your garage double as a shop, game room, or office? When your garage has the purpose of more than just storing your automobile, then you ought to have an insulated garage door for your home. When your garage is properly insulated, you’ll enjoy the benefit of optimized thermal efficiency with maximized air infiltration reduction. No matter what the weather is outside, a well-insulated garage will provide you with a viable garage space all year long, keeping you comfortable. You’ll keep as much cold out as possible during the winter months, and as much heat out as possible during the summer months.

Cold Weather Protection

Even if the temperature were to drop to below freezing, if you have winterized your garage, you’ll save money and time in the long run.

Insulate your garage. If your garage ever gets too cold, it can damage not only your vehicle, but also anything you have in storage there. Do you keep your washer and dryer in the garage? If you have a washing machine that still has water left in the lines or the pump, it can freeze and then crack. Unfortunately, the same risk is possible with your car’s fuel gels, which can freeze inside the combustion engine. Another issue that can arise is that paint can separate and become ruined in prolonged periods of freezing temperatures.

Insulate the walls of your garage. Proper installation of insulation in your garage requires that you carefully study the installation guide, and be sure you select the appropriate insulation thickness for your garage’s walls. Some typical mistakes people can make are: not securely fastening the batt insulation, cutting it too long or too short for the location, or not supporting it properly. Bear in mind that insulation needs to fit snugly; however, do not jam it in too tightly.

Repair or replace the weatherstripping. Weatherstripping will create an effective seal between your garage door and the garage door opening. If you feel any cold draft leaking into the garage between the door and the frame, then remove any of the existing weatherstripping if it’s brittle or cracked. Scrape off any remaining sealant using a pry bar and putty knife or flat scraper. Make the surface as clean and smooth as you can. After you totally remove the old weatherstripping, measure in order to apply the new weatherstripping. To align it, shut the garage door and make sure the rubber flap flattens slightly against it. You’ll have a good seal and the garage door will operate easily.

Insulate the garage door. A great variety of products is available to you for insulating your garage door, including a kit specifically designed to do so. The options for effective insulation include reflective barriers, foam board, and Fiberglass batt insulation.

Whatever option you choose, first you’ll need to cut the insulation to fill the garage door panels. Next, secure them with adhesive and make sure each stays fixed in place. If your garage door is not the kind with recessed panels, the whole job will be easier.

 

For most people, insulating the garage yourself is too daunting. If it all seems too much of a bother, then your best bet is to hire a professional to install a modern-designed insulated garage door for you. If you’re located in Roswell, Georgia, consider hiring a trustworthy professional from a reputable garage door company such as Roswell Garage Door Repair.

Install a unit heater inside the garage. Weatherstripping and insulation effectively protect your garage from extreme winter weather, but if you’d like to be extra toasty, add a unit heater. (On the other hand, if you experience only mild winters, then an electric unit heater is likely all you’ll need, since you’ll require heat only once in awhile.) This is a good way to heat your garage with minimal construction costs and space requirements. Gas-fired units are usually cheaper to operate overall, but they’re harder to install since they require a gas supply and exhaust venting. There’s also the electric model, which is easier to install but more expensive to operate. An especially efficient electric option is the mini-split heat pump, which provides efficient heating and cooling for your garage with only a three-inch hole through an exterior wall.

 

Hot Weather Protection

In the summer, the main goal is to enhance the airflow in your garage. All of these measures are worth considering:

 

Insulate the garage ceiling. If you use paper-backed batt insulation, ceiling wallboard isn’t required. Install the insulation using staples, paper side down, or keep the insulation in place with netting. You can also use staples to fasten the netting. Experts advise that you do both.

 

Wall insulation efficiently keeps out summer heat. Wallboard or other paneling should be used to encapsulate the material. You’ll prevent toddlers, teenagers, and pets from tearing things out.

 

Leave the garage door slightly open, about 12 inches from the floor, and also add a fan.

 

Plant a tree nearby. A deciduous or hardwood tree is an inexpensive and aesthetic way to cool your garage in summer. (It even keeps the garage warm in winter.) Plant the tree between the garage and the position of the sun during the hottest part of the day. The tree’s leaves will provide shade. (In winter, the bare branches will let sunlight through, giving warmth.)

 

Attach an adjustable rollaway awning onto the sunny side of the garage. In this way, you’ll create shade to cool things off during the summer.

 

Insulate the garage overhead door. For a metal garage door, add a layer of rigid insulation two inches thick, attached to the inside of each panel using contact cement. Or, an insulated sectional overhead door is a good alternative.

 

Install a stationary vent on the roof. This is an inexpensive way to make an exit point for hot air trapped in the garage attic. Or, if you can spend more, install a mechanical exhaust system, in which fans will draw cooler air from the garage into the attic. This will cool the attic and also the space below.

Article source here: HOW TO PROTECT YOUR GARAGE FROM EXTREME TEMPERATURES TO PROVIDE COMFORT AND SAFETY IN COLD OR HOT WEATHER

Roswell Garage Door Repair: Garage Door Closure Problems

There are many reasons why you might experience issues when closing a garage door. Sometimes, all that’s required is a bit of quick maintenance – something which anyone can do in their own time. But in other cases, door closure problems are a sign of damage. In the latter case, the team at Roswell Garage Door Repair strongly recommends against taking matters into your own hands.

The best way to identify whether you need to call a garage door professional is by inspecting your garage door. In this blog post we will guide you so you end up doing this in the safest possible manner.

What to look out for when inspecting your garage door

You should avoid tampering with broken components, but there are some easy checks all homeowners should do before getting in touch with a technician.

1. Check your transmitters

Your closure problems could be as simple as needing to change a remote control’s battery. See if you can close the door using the switch on the wall. If everything seems to working just fine, try and test the transmitter on your car – and if you have more than one of these, check both to see if it really is a battery issue. Changing a remote control battery is easy enough: just open up your remote control and put in the appropriate battery.

Hasn’t resolved your issues? Then try the second alternative.

2. Stop, Look and Listen

First and foremost, check if there isn’t anything blocking the door’s path. This could be a garbage can that’s too close to the door, a toy that was dropped by accident or anything else that could have triggered its reversing mechanisms. If there’s nothing physically causing interference, check the photo eye sensors on each side of the door – if they are misaligned or dirty, it may affect your garage door’s ability to open or close normally. Cleaning a clogged-up sensor only takes some gentle dabbing of warm water and a streak-free cleaner, but one must be careful not to scratch the glass surface. As for photo eye sensor realignment, you will need specific tools to do the job and an expert can provide any details needed.

If that’s not the source of your issues, listen to all noises as you try to open and close the door. When operating smoothly, your door will not be making any scraping noises or other dissonant sounds. Also, observe the door as it opens – is it struggling to make its way up? Does it look slightly askew? If anything we said sounds true so far, proceed to the next stage.

3. See how easily you can lift the door

Close the door, disconnect the automatic opener and lift it about halfway. Lifting and keeping it in place should be easy – if you struggle, your door is most likely out of balance. An out of balance door is usually a sign of broken springs or cables, so it’s best to call a technician to provide you with a repair or replacement in this situation. These damaged components can be quite dangerous to handle without proper training, so don’t try and remove any damaged cables if you spot them.

To be certain that these are the cause of your problem, refer to the next step.

4. Take a quick glance at your rollers, springs and cables

This one is one of those “look, don’t touch” procedures – especially when it comes to broken springs and components connected to the cable system. Focus your attention to the bottom of the door’s roller bracket. Look for broken strands, chips, cracks or other signs of damage. Damaged rollers, cables and springs should be replaced as soon as possible.

When (and how) to hire a technician

If you know, or suspect, that your door closure issues are the sign of damage, get in touch with a garage door repairs technician in your area as soon as possible. A lot of businesses offer 24/7 repairs in the most urgent cases – so if your door is damaged to a point where it has become a safety hazard, this might be your best option. Tell them your issues and troubles and they will take things from there.

Even during emergencies, we would recommend you don’t jump in and hire the first business you find online or in the yellow pages. It’s always best to call a couple of garage door repair professionals before settling on the best one to hire.

But how do you know you’re hiring a trusted professional? Referrals are definitely the best place to start – see if anyone you know has had to hire a technician in your area, and ask about their experience. Otherwise, find a few places to investigate yourself paying attention to customer reviews, any complaints filed against the business (ask your Better Business Bureau), or any client references they have in the area. Try to be present on the day your chosen technician arrives, and never pay full price upfront.

Don’t forget to ask for a full cost breakdown of repairs, details about product warranties, and information about the company’s licensing and insurance. In order to ensure your business is legitimate and locally-based, check if their address matches what is in the location, and listen to the way they answer your phone and queries. Any business who refuses to give a full company name, opting to answer the phone with a generic sentence like “garage repairs” is not to be trusted.

Do you live in Roswell, Georgia? The certified, insured and field-tested technicians at Roswell Garage Door Repair can help you with your door closure problems. Like any trusted repair professional, we offer complimentary consultations and a full price quote upfront before any repairs are conducted. Make an appointment for an inspection and we will come with a full inventory of tools on-hand to get things sorted out in a timely manner. Don’t live in this area? A quick search will reveal a professional in your location.

We hope this blog post has helped shed some light on some of the common reasons why your garage door may experience closure problems. Look and listen closely to identify any damage, or simply check if your issues are as simple as just adding oil to parts.

 

Article source here: Roswell Garage Door Repair: Garage Door Closure Problems

Finding a Good Garage Door Service

When we are spending our money on a service that we need, we all want to make sure we’re getting what we pay for. If you pay for quality services, you want to receive ‘quality’ services. If you are currently experiencing problems you’re your garage door or are simply looking for someone who can properly install a new garage door, finding the right one is essential. Finding a garage door service to attend to your service needs can be accomplished with some forethought.

 

Service providers are in the business of making money. So, while they may try to upsell their services, it shouldn’t always be viewed as them trying to take advantage of you. In some instances, you likely will need what they are suggesting; it just may be that it can actually be handled sooner than they are letting on. Finding a reputable and reliable garage door service is not as hard as it might seem. How can you distinguish between someone who is simply being forthright or someone who is trying to sell you services that you do not need. We can ask others about their experiences with a particular service provider and read reviews about service providers in the area. However, when you call on someone for a quote, there are specific observations that you can make in order to determine the character of the technician.

 

Observing a Service Technician

 

1. Offer Full-Disclosure

If they are a professional and reputable service, the technician will arrive with a price book that has a listing of the parts of the garage door. This allows them to show you what cost will be involved in the work they will be asked to perform.

 

2. Knowledgeable

They will know what their inventory consist of so that they will not offer you something they do not have. In some cases, they will be able to tell you that they do not carry your part but can order it. When they have to order the part, they should be able to tell you when the part will be in and when they can have the work done.

 

3. Sales Material

A reputable service will make sure that their technicians always have sales literature available in order for the customers to see what they have to offer.

 

4. Thorough Inspection

Will not just skim over the problem but really try to understand what has caused the problem. When they perform a thorough inspection to identify the problem, they are able to up-sell their services. Again, this can benefit the seller but it also benefits the customer. If they find something wrong that you will have to call them about in a week or so, it is best to have the problem resolved now rather than later. It can save you in additional service requests. Also, there might be a problem that you are not familiar with that could be dangerous. When a technician performs a thorough inspection of the cause of your problem; they will be able to identify the danger that may exist, such as, weak or worn garage door springs.

 

5. Be Prepared

A really good sign of a reliable garage door service in Roswell, Georgia, like Roswell Garage Door Repair, is that the technician will always have some of the most commonly used parts available. The parts that are replaced most often consist of weatherstripping, rollers, springs, motor operators and hinges. This enables the technician to attend to any other problems as quickly as possible without returning again.

 

When the technician finds any problem other than the one they were called on to repair, a reputable service provider will be able to explain the problem and why the repairs or replacements are necessary. Offering a customer as much information as possible gives them the chance to make a well-informed decision.

 

6. Accepts ‘NO’

If a technician has tried to sell you something that you have told them you are not interested in and yet they continue to push the matter, walk away. Perhaps the customer is not prepared to take care of the problem due to budget restraints or they may want to get a second opinion. Whatever the reason is, you should never feel pressured into getting services that you do not want. A good service technician will simply make sure that the customer is fully aware of their options and even any safety concerns they may need to be aware of and leave it at that. The last thing that a respectable garage door service would want to happen is for the customer to be so turned off by their sells techniques that they do not recommend their services to others.

 

7. Makes Time for You

If you’re hiring a service professional to perform an important job for you, they should be professional enough not to schedule so many appointments in one day and all within a short space of each other. You want a technician who will be able to make a precise analysis of your problem, troubleshoot any other issues and discuss these things with you, without rushing. They leave enough time to do all of the above and still answer any questions the customer may have.

 

Go With Your Instinct

 

You really are your best judge. If you do not feel as though a service provider is being honest or you do not think they will follow through and provide you with the quality of service you want and need, do not be afraid to keep looking. Most people realize that consumers are shopping around and they do not expect to get the business of everyone whom they offer a quote to. Whatever your reason is for choosing one garage door service over another is up to you. Don’t go against your better judgment because you may regret it later. It is advisable to consult with more than 1 service provider before making your final decision. Get what you pay for.

 

Article source here: Finding a Good Garage Door Service

Garage door maintenance – spores

One thing you DON’T need in or near your garage door is mold! Here in Roswell, GA we often have damp, humid weather that can result in mold growth. Spores can grow and thrive in dark, moist and unventilated environments and garages fit that description to a tee! Even the most conscientious home or business owner can find themselves entrenched in a mold spore problem. Garages are often the last place people suspect mold to grow in as they usually look for it in bathrooms, outdoor sheds or in kitchens.

Mold proofing your new garage

You’ve got a real head start if you are just now building your garage! You can generally avoid mold spore growth by using building materials that mold finds inhospitable like metal studs in place of wood. In addition, avoid wood for your garage walls as much as possible and use vinyl siding or aluminum instead. By making these adjustments you can drastically cut down on garage mold AND wood eating pests that also can become a problem in humid and damp areas like Roswell, GA.

Mold proofing your existing garage

If your garage is already built and NOT made of metal, it’s best to mold proof your garage now before any mold can form and grow! One of the best ways to do this is to keep the air inside your garage as moisture proof as possible. You can do this by ensuring that your garage is well ventilated and not airtight. Be sure to make use of dehumidifiers to extract excess moisture from the air. Your goal is to inhibit mold spores from forming and growing in a wet, damp or dark environment which they thrive in.

Check your roof

The roof of your garage is all-important when it comes to mold prevention as rain tends to leak through roof cracks and collect in the garage where they add to the moisture and humidity inside. Even the smallest leak or drip can wreak havoc during humid times so be sure to keep your garage roof in good working order and fix any leaks as soon as possible! Concentrate your efforts on eliminating any moisture and keeping your garage interior as well ventilated as possible.

Mold removal

It is imperative that mold is removed quickly, and if possible, in its entirety. Leaving just a little bit of it will soon have it spreading rapidly and with as much (or more) vigor as before. If you notice mold growth on your garage door itself or on the walls or corners of your garage it’s best to eradicate the microorganisms with bleach. Mold loves porous material like concrete and drywall and since a good portion of home and business construction is made of these materials it’s good to know how to treat them to remove the mold spores as effectively as possible.

Roswell Garage Door Repair recommends one part bleach to four parts water as a solution to clean garage doors and walls. Are your garage walls unfinished drywall? Just spray the bleach/water solution directly on it and let it soak in. If your garage door walls are wood, concrete or vinyl then be sure and wear gloves and scrub the surface with a sponge or scrub brush. The same goes for the actual garage door itself. Don’t do this with the garage door closed! Your work area needs proper ventilation so the door should be open and you really should wear a respirator.

Bleach alternatives

If you don’t want to use bleach to clean your mold you can work with other ingredients that are also effective. You can use vinegar but change the portions and use one part vinegar with one part water. Be sure to use the white vinegar as opposed to the apple cider one. Add a tablespoon of dishwashing detergent for every quart of solution that you make. Denatured alcohol is another useful treatment. Use full strength for maximum benefit. You can spray this on or wipe with a sponge. Don’t forget to ventilate your work area! Not only do you NOT want to breathe any of the fumes but your garage doors and walls need to dry out completely. Keep a door or window open if possible or if doing this in colder weather, run a space heater or dehumidifier to remove the moisture.

Other tips

Your garage is especially vulnerable to attracting moisture which mold needs to grow and thrive in. Garage doors and interiors are exposed to the elements and tight seals between the bottom of the garage door and the floor are rare. Be sure to clean up any pools of water that leak in after a rain or snowfall. Tires also track in water, snow and dirt as can snow shoes, bicycles and even skateboards.

Do you have a lot of cardboard in your garage? Mold spores love cardboard boxes, books, rags, fabric and other items of porous make up. A trip to Lowes, The Container Store or Home Depot for plastic containers might be a smart idea if you want to cut down on mold growth in your garage. Insects of all kinds also like these materials so putting your stored items into air-tight plastic containers really makes sense.

Be careful!

Be extra careful to NOT mix your bleach mixture with ammonia or other cleansers; toxic fumes can result! Also, do not mix white vinegar with hydrogen peroxide! Stick to the mixtures and proportions mentioned above and you should be just fine!

Let’s summarize

Here’s the gist of our post here. Follow these tips and be mold free in your garage!

Keep your garage door walls and interior as moisture free as possible!

Get rid of rags, cardboard and other porous and flammable substances and replace with plastic totes and boxes with lids

Keep your garage well ventilated and dehumidified as much as possible.

If you paint, use waterproof or mildew resistant paint on the walls or concrete.

If you find mold spores clean them using the above solutions and proportions!

Article source here: Garage door maintenance – spores