Garage Door Spring Issues You Can Identify

Garage door springs can be complicated to understand. There are some things that you might read on the Internet that are true and some that are not. However, our garage door repair technicians at Roswell Garage Door Repair are far too familiar with the problems that garage door springs can cause to people. We repair and replace them practically every day. Since your springs go through a lot of use, it is only reasonable to conclude that they will eventually end up needing some attention eventually. When they do, they usually begin to show signs of this in the way they perform or in most cases, in the way they don’t perform.

 

What Your Springs Do

 

Your garage door springs lift and lower your heavy garage door. If the garage door is a commercial door, they have even heavier weight to lift. This lets you know just how sturdy the springs actually are. Your garage door opener operates the door but it is your springs that do the heavy lifting. Without sturdy springs to lift the door, the garage door opener wouldn’t be of much use to you. There are two types of springs that we service, extension springs and torsion springs.

 

We mount the torsion springs horizontally about the top of your door but the extension springs are mounted on each side of your garage door. These hand parallel the horizontal tracks. They both have a life cycle and once the life cycle has been reached, it will be time to either replace the springs or repair them. They will begin to wear out until they are repaired or replaced.

 

The torsion springs typically have a lifespan of 10,000 cycles and are made of tempered and hardened steel. They don’t typically wear out sooner than the 10,000 cycles since they are built to last. However, keep in mind that they go through a lot during their life cycle. Some doors are used more often than others, therefore, the life cycle of one persons springs will differ from someone else’s. They hold a lot of stored energy and need to be repaired to prevent them from breaking and falling down on top of anything or anyone. A household with two vehicles who make daily trips, the average torsion spring should last for up to 7 years. It’s advisable to replace the springs at the same time because they usually wear out at the same time.

 

Extension springs are usually found in older buildings or homes. They will generally last just as long as torsion springs. However, there are various factors to consider when it comes to how long they will actually last, such as weight of the door, humidity, and the amount of maintenance begin performed on the door.

 

DIY Or Not DIY

 

Do-It-Yourself projects are good but some things are simply better left to the experts. When you’re talking about the installation, repairing or replacing of garage door springs, this is something that should only be handled by qualified and professionals. These types of springs are extremely dangerous due to the amount of pressure they are wound up with. If one were to break while you were working on it, it could cause you grave injury. In some worst case scenario’s, human life has been lost due to an improperly handled spring. We do not wish this for anyone and that is why we urge you to rely on the expert services of a qualified garage door repair technician to evaluate your garage door springs. Aside from harming yourself, if the spring were to break, it could fly through a window and harm someone else. If you do not want to be the cause of injury to anyone, including yourself, leave the job in the hands of the experts. Handling it on your own simply is not worth the effort.

 

Determining If Your Springs Are Damaged

 

Here are some ways to determine if there is a problem with your garage door springs:

 

• Your door falls down quickly with a loud sound
• Your door rises up about 6 to 8 inches but then suddenly stops.
• It begins to start slowly and then eventually begins to speed up and starts going up quickly
• You notice a loud bang when lifting the garage door

This can occur when they aren’t even being used and this is why some people dismiss the sound, assuming it was nothing until the next day when they realize they are not able to open their garage door

• It goes up and down at a slight angle

A broken extension spring will cause the other spring to work harder to compensate, which is why it looks crooked

• The door jerks as it goes up

This is an indicator that a spring is broken and the other one is carrying the  weight of the broken spring

• While lower your garage door, it suddenly falls down very quickly

In this case the garage door opener is bearing the weight of the unbalanced springs

• If you see a gap in your torsion springs it means a spring has broken and the metal has recoiled, leaving a gap
• The top part of your garage door is bent

This can be caused by the garage door opener trying to lift the weight of the door without the help of the springs

• It is hard for you to lift the garage door when it is manual mode

 

If you notice any of these things occurring, discontinue use of your garage until you have sought professional help. You would be wise to pay close attention to how your garage door is functioning whenever you use it. Not paying attention could be dangerous to you and whoever uses your garage. We know this is not something that most people do until it is too late that is why we always suggest regular, routine garage door maintenance. With garage door maintenance, a weak and worn spring can be determined before in incident occurs.

 

Your best bet

You are not really betting but you are encouraged to call a licensed, bonded and insured garage door repair shop that specializes in spring service. You can call our Roswell Garage Door Repair shop or another local firm that you like and trust. Most offer free price quotes, same day service and round the clock emergency help in case you need it. Working with the right garage door repair shop can be an affordable and time saving experience. Think about it; your time is valuable and so is your safety. Why not enjoy warranty protection, numerous safety and performance checks and superior quality springs and service by calling the professionals that handle garage door springs on a daily basis?

Article source here: Garage Door Spring Issues You Can Identify

Roswell Garage Door Repair in Roswell, GA - Live Stream Edit

Watch on YouTube here: Roswell Garage Door Repair in Roswell, GA - Live Stream Edit
Via https://www.youtube.com/channel/UCNKUQ_YIJIlYibM07QiBZyA/videos

Roswell Garage Door Repair in Roswell, GA - Live Stream

Watch on YouTube here: Roswell Garage Door Repair in Roswell, GA - Live Stream
Via https://www.youtube.com/channel/UCNKUQ_YIJIlYibM07QiBZyA/videos

DOES YOUR GARAGE DOOR HAVE A MIND OF ITS OWN? DON’T WORRY. THERE’S SOMETHING YOU CAN DO!

Is your garage door opening and closing at random? There are numerous reasons this is going on:

 

1. First, test the transmitter frequency. A neighbor’s remote may have accidentally been programmed to the exact same frequency as yours. If that’s the case, erase the remote control from the memory of your garage door opener, and then reprogram the keyless entry and remote control.
2. Second, inspect the transmitter. It might be wedged under something that inadvertently pressed your remote control mechanism, which means, somewhere, a button is stuck. The transmitter may be sitting under something you forgot you left in your automobile, or underneath something else you left close by. If the LED light by the learn button is flashing continuously, then your garage door opener is receiving a steady signal from your remote control. (You’ll find the learn button above the antenna wire hanging from the motor head, or under the light cover. It’s either red, orange, purple, green, or yellow.) Take out the batteries from your remote, and if the light stops flashing, then the problem is a stuck button.
3. If neither of these is the culprit, there may be a short in the wall-mounted door control, which means that unwanted signals are going out to the garage door opener or to the logic board (that is, the circuit board).

• If your garage door opener activates by itself while the wall-mounted door control panel wires are disconnected, you’ll probably have to replace the receiver logic board.
• If the opener doesn’t activate by itself while the wall-mounted door control panel is disconnected, then, in all likelihood, you’ll need to replace the wires to your wall-mounted door control panel.

 

4. Besides a short in the logic board, there could be a short in the wall button wiring, the wired keypad, the wall button, or the garage door opener remote; or, there are some other electronic issues to be dealt with.

 

5. Your remote might be emanating random signals. This is often a sign that the batteries are nearly worn out, or that the remote is faulty.

 

6. A police radio, CB radio, local radio station, or radio tower can make a garage door open and shut by itself.

 

 

DIY

 

There are some additional problems you can likely resolve all on your own. If your garage door ever goes on the blink, there are many possibilities for the difficulties you’re facing:

 

Does the garage door opener run for several seconds, but then turn off? Often this will happen on older garage doors. The garage door is shut, and the garage door motor tries to lift it, but it still doesn’t move. First, look at the springs. If the springs aren’t broken, then examine the track for any grime or minute obstacles. If neither of these is the issue, maybe your garage door is the kind that has a built-in lock that’s engaging by mistake.

 

Does the garage door not open with the remote? There are several reasons this is occurring. 1. You could be out of range from your garage door. 2. Perhaps you have to recharge or replace your batteries. 3. The garage door motor’s antenna is likely damaged, or it’s blocked from the signal. 4. Your remote must be reprogrammed.

Does the garage door opener run, but the garage door still will not open? If there is a power outage, your garage door opener has a disconnect switch, so that you can manually close or open the garage door. This switch is usually attached to a rope or knob, which can sometimes unintentionally get unhooked. Open or shut your garage door all the way, and then reattach the hook securely. Your transmitter should be back to normal.

 

 

More Complicated Problems, Calling for Professional Attention

 

Does the garage door slam with a loud bang? Then in all probability, you have a broken garage door spring, which isn’t offsetting the garage door’s weight properly. Or, the cables might be broken. In either case, this is bad. Call a garage door repair technician right away.

 

Does your garage door only go part way down, but open again? A garage door is designed with a reversing mechanism to stop it from smashing an object in its path. The reversing instruction is activated by any item that is blocking the garage door’s path ~ a bicycle, a trash can, or a box, for instance. Another possibility is that there’s a build-up of debris on the tracks ~ a tiny object or grime ~ which keeps the rollers from moving. The expertise of a garage door repair professional is required.

 

The garage door track may be out of alignment. This is also a big problem. When the metal track isn’t in alignment, the garage door isn’t going to be moving at all. Check for any gaps between the rail and the rollers, and also look closely to see if there are any bends in the rails. The garage door’s significant weight will worsen all these issues eventually, so don’t procrastinate! Your garage door is bound to grow more and more dangerous. It’s time to hire a garage door repair expert.

 

 

It’s never a good idea to try to adjust your garage door yourself ~ unless you’re an engineer! If your garage door isn’t serviced properly, the garage door springs can go straight through a wall! Furthermore, there’s the possibility of serious injury, and even death. The garage door bottom brackets, cables, and drums will likely also need adjustment. It’s not worth it to take any risks. So unless you already know exactly what you’re doing, then your best bet is to hire a local garage door repair technician. If you live anywhere in Roswell, Georgia, then consider hiring a reputable garage door repair company you can count on, such as a staff mobile garage door repair specialist at Roswell Garage Door Repair, where free consultations are available.

Article source here: DOES YOUR GARAGE DOOR HAVE A MIND OF ITS OWN? DON’T WORRY. THERE’S SOMETHING YOU CAN DO!

Roswell Garage Door Repair: What to do when a garage door won’t open or close with the remote control

Electronic garage door openers are a convenience that nobody wants to live without. Given the fact that the garage is the main point of access of most homes, you want to be able to enter and exit through it without any hassles.

While you can usually expect all your door’s components to work for several years with no problems whatsoever, they’re not immune to the occasional glitch.

If you’ve found that you’re no longer able to open or close your garage door with a remote control, there are a few things to check before calling an expert. After all, your issues could be as simple as needing a battery change, or you might be dealing with more serious damage.

With that in mind, here is what we advise homeowners to do in this situation.

Test the wall switch 

See if you can open the door by pressing the button by the opener. If yes, then the problem lies on the remote control itself. Otherwise, you’ll either need to replace the opener battery, or you might need to get a technician to repair the motor for you.

If you have more than one remote control

It’s always best to check them both. If one of them works, but the other fails, you just need to replace the battery. You’ll most likely have purchased both transmitters at the same time, so don’t rule out the possibility of both needing a battery change. Open up the back of the remote (depending on your type of opener, you might need a screw driver to do this) and put a brand-name battery inside – avoid the cheaper generics as they will not last. If that doesn’t fix your issues, then proceed to the next step.

Inspect the door for damage

There are various maintenance checks you can do yourself before calling a garage door repairs technician. Here are the key things to look out for:

• Is your door quite visibly out of balance? In some cases, you might be able to tap it back into position. But, most often, you’ll need an experienced repairs technician to do the job. If in doubt, leave it to the professionals – you don’t want any unnecessary damage on your hands.
• Check the roller bracket for any broken pieces, signs of rust, damaged springs or rollers. This is very much a “look, don’t touch” procedure: broken springs and rollers are very dangerous to handle without proper training and tools, as they will leave your garage door quite vulnerable to collapsing.
• Inspect the area around the photo eye for any built up dirt – if you can see debris and gunk amassing in the area, clean it up with a streak-free cleaning solution and some warm water. You’ll find the right cleaner for the job at your local garage door repairs business.
• Another check for photo eyes: make sure they’re not misaligned. In some cases, you can realign them yourself using a spirt level (just remember to measure the angle from the ground on each side). If they’re too misaligned, however, you’ll need to ask a technician to do it.
• Try to lift up the door manually. It shouldn’t be heavy to lift up – if you struggle to open it or it won’t stay in place, your door might be out of track. In this instance you’ll need to contact a garage door repairs professional immediately.

Call an expert

When all things fail, your best option is to call a garage door repairs technician to inspect your opening and closing issues.

All credible professionals will have experience, training, and a full inventory of tools by their side. You can expect quality repairs and replacements, for very affordable prices and with a good sense of immediacy in the most urgent cases. In fact, most locally-based operators will provide 24/7 emergency assistance for their customers, and won’t charge for initial consults or price quotes.

Take the time to do some research before settling on a garage door repair service. See if anyone you know (friends, family, neighbors, acquaintances) can recommend any businesses in your area, and note down specific companies for your inquiries. Always hire a local operator, with a fully verifiable address. Where possible, try to consult with them in person – though talking on the phone is perfectly reasonable too. Ask the business about product warranties, client references (good professionals won’t balk at this), minimum callout charges and a full cost breakdown for whatever repairs you might have in mind. Online reviews can help you glean a business’s reputation too, and casually asking how long the company has been operating might give you an indication of whether they’ll be able to uphold their warranties. A quick search for a company through the Better Business Bureau will show you if any complaints have been laid out against them, and checking their credentials against the manufacturers they work with could help out too.

What about homeowners in Roswell, GA? You can always count on the Roswell Garage Door Repair crew to set your problems straight. Talk to our licensed, insured and field-tested technicians to find out more about our solutions. Tell us your concerns, and we’ll try our best to point you in the right direction – if needed, we can come to inspect the damage at your convenience.

No matter where you’re based, though, finding the right professional for the job is as simple as making the right inquiries. Clarify everything with the person you’re consulting, and don’t rush the hiring process.

We hope this guide helps you make sense of a malfunctioning opener, and the precautions to take if any issues occur. Whether you’re dealing with a remote control that needs to be replaced, a faulty battery that needs changing, or a more complex repair that needs to be addressed, these quick checks will guide you towards the right solutions. Always get in touch with a qualified professional in your area if any issues arise, or if you have any pressing queries and concerns. From there, everything will be back to operating smoothly shortly.

Article source here: Roswell Garage Door Repair: What to do when a garage door won’t open or close with the remote control

Top Reasons Why Your Garage Door Will Not Open

There may come a time when you are unable to open your garage door. Don’t panic. These things happen from time to time. You’re not the first person that has happened to. When someone in Roswell, GA has a problem with their garage door, they often rely on Roswell Garage Door Repair. We know how to effectively evaluate the situation and fix the problem for you. However, you may be wondering whether or not it is something that you are doing or have done to cause the problem. Here are some of the most common reasons for your garage door to cause this type of problem.

 

Even when you are prone to try to research how you can fix the problem on your own, but this is definitely a situation that should be handled by a professional garage door technician. Knowing the exact cause of the problem makes it possible for you to take immediate action. It could be something that is uncomplicated and something that you could fix on your own. We’re not against your fixing the problem on your own if it is an easy fix but we are against your troubleshooting the problem. This could result in your being harmed. You can avoid this by calling on our qualified service technicians to handle the job.

 

Here are the top reasons why your garage door might not open:

 

• Transmitter Problem

We’ll make sure that your garage door transmitter is working properly. If the transmitter on the wall is still able to open the garage door, the problem may be something as simple as replacing the battery to your car transmitter so that the transmitters communicates effectively with each other. When you do this, you might as well change the battery to the transmitter on the wall since they were likely installed at the same time. This is definitely something you that is safe to do yourself. Just keep in mind that some transmitters have a back that needs to be screwed off with a screwdriver.

 

• Obstructed Photo Eyes

To serve as a way to protect you from harm, there are photo eyes on both sides of the garage door. When there is debris in the path of either of the eyes, you’ll have a problem with your doors opening. The photo eyes are designed to keep the automatic door from shutting on you or your car. If the door opens but when you try to close it, you’ll need to inspect the photo eyes for debris or something that could be blocking them. It is possible for the beams to get blocked and prevent the doors from working normally. The photo eyes can also become misaligned over time, which means the eyes may not align. When they do not align, this will prevent the door from opening. This is also something that you can do yourself. You have to be careful when cleaning them or you could actually scratch the lens. All that is required is a soft cloth and streak-free cleaner to clean away any debris on the photo lens. Checking the alignment can be a little tricky. You might want to call on the services of a trained professional to fix it if you believe this is the cause of your trouble.

 

• Tracks Unaligned

In order for the door to operate properly, the metal track that it runs on has to be properly aligned. When there are visible bends or gaps between rails and rollers, there is certain to be trouble. Since the door itself is very heavy, it can contribute to the problem, making it so bad that the door will not work when you need it to. This also makes it very dangerous to operate your garage door. You can determine that the door is misaligned by listening to your car when you are pulling in and out of the garage. If you notice any rubbing noise whenever the door gets to a certain point on the track when it opens and shuts, you may have a misaligned track. It might even begin to slow down whenever it gets to that point. There are a few simple tricks to fix the problem. You might be able to gently tap on the track with a rubber mallet to get it back into the right position. A level is needed to ensure it is straight.

 

• Out of Range Transmitter

When you’re transmitter will not enable you to open your garage door, the problem could be that it is out of range of the range of the garage door. There is a very specific range that the transmitter must be in of the door in order for it to operate. If you are attempting to open the door to your garage without being physically in front of your home, it will cause problems with your door opening. Wait until you are in front of your driveway to press the transmitter button. If the transmitter is the problem, this should remedy the problem. If this doesn’t remedy the problem, the next thing to check is that the antenna inside your garage is not obstructed by something. If it is blocked it will not be able to send the signal that it should in order to signal the door to open or close. Also, make sure that your antenna isn’t damaged. If the antenna is damaged, you’ll need the help of one of our qualified service technicians to replace it.

 

These are just some of the top reasons why your garage door might not open. These are also the things that are easiest for you to resolve on your own. However, if none of these things work, chances are that you’ll need to rely on the services that we have to offer to you. You’re most likely going to find it a lot easier to leave the job to the trained professionals who know exactly where and what to look for.

Article source here: Top Reasons Why Your Garage Door Will Not Open

GARAGE DOOR WON’T STAY OPEN

Are you experiencing a garage door phenomenon that involves it not staying open? Does it start to rise and then suddenly stop and then come back down? Garage door activity like this can be quite worrisome; after all, what if it comes back down on top of your car, or you? Roswell Garage Door Repair offers these easy tips on how to deal with this problem. Read on and if you have any questions, give our shop a call or contact your favorite Roswell, GA garage door repair location.

Who or what is the culprit?

Our garage door repair pros often get calls about their garage doors that won’t stay open. One of their first questions is “what causes this?” They want to know if the problem is their remote, or their springs, or maybe their opener system. The answer depends on each person’s garage door and circumstances so we’ll start with talking about the springs.

Power lifters

Your garage door seems to magically lift and lower when you push the remote button. In fact, some people assume that the opener IS the remote and that this is what does all the work. In reality, it is your set of garage door springs that really does the heavy work. You either have torsion or extension springs operating your home or business garage door. Both work well and can last for thousands of cycles. Sometimes, however, they snap or become damaged and when they do, it is reflected in your garage door’s performance.

Warning!

Now, please don’t go out and buy new springs and try and fix or replace them yourself! Spring repair is best left to the experts that have the skillset, knowledge and experience in servicing them. Garage door springs can be dangerous, too. This is especially true for extension springs that have caused bodily injury, property damage and even death when not serviced correctly so don’t take chances; call for a professional, if needed!

You CAN do this to test your springs

While it is best to NOT repair or install your own torsion or extension springs, there is a simple test that you can do on your own that is safe and easy to do. You can manually disconnect your garage door from the opener. It is still attached to your springs but the opener will be disconnected. Simply pull down on the red knob at the end of the emergency cord. This allows you to lift your garage door by hand. When you do this, notice how easily or how difficult it is to lift your garage door. Did it go up smoothly or did you notice some resistance and choppy action? Now open your garage door all the way and see what happens. Did it stay or start to come back down on its own? If you experienced a hard to lift garage door, or if it started to come back down on its own, you need spring repair or at least to have your springs re-tensioned. This is most likely the reason that your Roswell, GA garage door won’t stay open when you need it to.

Another possible culprit

If your garage door starts to rise but then “changes its mind” and comes back down, you may be experiencing a problem with your close limit switch. It most likely does not need replacement; only adjustment. It works like this. As your garage door rises, the opener motor pushes against the limit switch which stops the rise once the garage door has reached the correct height. If the limit switch is not set right, the garage door will not go all the way up and may start going back down again. You can adjust your own limit switch on the opener motor. Feel free to refer to your owner’s manual for help or go online and see any number of YouTube videos that give you over the shoulder instruction on how to make this adjustment. If you wish, you can always call a local Roswell, GA garage door repair technician that can make the adjustment easily, and on your time frame.

Are you renting or do you own?

If you are renting your home, you should contact the property manager or owner and let them know about the problem. Usually, they will get it fixed for you at no charge, but some leases have a clause that states that repairs over a certain dollar amount are their responsibility and under that amount; yours. Check your lease agreement for your particular situation. If you own your property or are lease optioning it, the repairs are all up to you. Be sure to save any receipts for expenses incurred while getting your garage door fixed or adjusted. If you are using a local Roswell, GA contractor, handyman or garage door repair expert, try and get two or more estimates and/or opinions as to what the problem is. Get your service estimates in writing and if you like the service you get; add the technician’s telephone number to your smart phone for handy access at a later date.

Should you call a professional?

That is your choice but always consider the options. You might want to try DIY (do-it-yourself) service in order to save a little money or to learn a new skill. Or, you may have no interest whatsoever in servicing your own garage door and just want the job done right and done now! In that case, a call to a full service Roswell garage door repair shop is what is needed. You are always welcome to call on Roswell Garage Door Repair or your favorite local establishment if you already have one in mind. Remember; your garage door needs to work correctly, safely and reliably. Why not use a service that can help with every component of your home or business garage door? From opener unit and springs to safety sensors and garage door locks, choose a professional shop that does it all.

Article source here: GARAGE DOOR WON’T STAY OPEN